Cream Dye Developer

Allergy Test

The formulation of our dyes does not contain any harmful substances, but an allergy test must be performed at least 48 hours before the treatment.

Mix the liquid dye with the oxidant and apply it behind the ear or in the bend of the elbow. Wait 10 minutes before removing the product with a damp cotton pad. If no reaction occurs within 48 hours, you may apply the dye and oxidant to the eyebrows and eyelashes.

Warning

For professional use only.

Wear gloves.

Do not use if the eyes are irritated, infected, or show an allergic reaction.

Do not use during pregnancy and breastfeeding.

Discontinue use if irritation occurs.

In case of direct contact with the eyes, nose, or mouth: rinse immediately with plenty of water and consult a doctor.

Discontinue product use if red spots, swelling, irritation, or itching appear.

Keep out of reach of children.

Store in a dry place at room temperature.

1. Before Tinting Eyelashes and Eyebrows.

• Shake the hybrid tint bottle well before use.
• Remove all eye makeup before tinting the eyelashes and eyebrows.
• For optimal results, eyebrows should be dry and free from any oil or sebum, as this can create a barrier against the hybrid tint and prevent it from adhering to the skin or hair’s surface layer.

2. Skin Preparation.

For better results and longer-lasting color on the skin, you should clean and exfoliate the brow area (optional).

We recommend our Lash Foam; use a brush in circular motions before rinsing with saline water. This process works for both brows and lashes and ensures the removal of dead skin cells, sebum, and oils.

3. Preparing the Tint.

Mix the liquid hybrid tint with the cream oxidant to obtain a creamy paste using an application stick or brush.

The usual mixing ratio is two drops of liquid hybrid tint with one drop of cream oxidant.

4. Tinting Procedure.

Step 1

• When the client closes their eyes, apply the pre-prepared tint to the eyebrows with care and precision.
• It is strongly advised to map the eyebrows before applying the tint for a clean and precise result.

Step 2

• Ensure the hybrid tint is placed directly in the shape you desire, as it begins working immediately upon contact with the skin.

Step 3

• Application time varies from 2 to 10 minutes, depending on the desired intensity and results. We recommend a total time of 10 minutes; however, monitor the process to check how the tint develops on the skin and hair.

Step 4

• For the best results, consider removing the front of the brows after a few minutes for an ombre effect.
• For a more ombre effect: 6 to 10 minutes on the tail, 4 to 6 minutes on the body, and 2 to 4 minutes on the head of the brow.

Lashes

• The processing time for lashes is 5 minutes. Apply a protective patch to this area, and ensure the eyelash tint does not touch the skin.

5. Removing the Tint.

Step 1

• Remove excess hybrid tint with a cotton swab or pad, from the front of the brow towards the tail, taking care not to stain outside the brow line.
• Remove the remaining tint with a slightly damp cotton pad, wiping from front to top. Avoid rubbing motions.
• As hybrid tint is very pigmented, we advise taking care not to overstep, and if this occurs, wipe immediately with a dry cotton pad.
• If a stain remains, don’t worry—you can use our Dye Remover.

6. Aftercare.

Important Note: The hybrid tint may appear darker on the first day; however, this is a crucial part of the process as the tint continues to oxidize on the skin before reaching its final shade.

The tint will begin to fade once the brows are wet.

• Avoid using makeup and facial cleansers around the area