0
- New
Copper Mahogany - Noemi Gel Tint 10ml
€12.50
tax excl
/
€15.13
tax incl
4262426611185
4262426611185
Copper Mahogany is Noemi's mahogany shade in a gel texture. Its low-intensity red pigment leaves only a subtle stain on the skin, making it more of a colour-mixing and correction tool than a base shade. Use it to adjust a colour or add a copper-red undertone to another tint, for example by mixing 10% Copper Mahogany into Golden Blond to create a strawberry blonde shade. Mix in a 1:1 ratio with a Noemi developer. Suitable for eyebrows and eyelashes. 10 ml tube, providing approximately 40 applications. Intended for professional brow and lash artists.
9
product(s) in stock
Copper Mahogany Gel: the mahogany shade for adjusting your colours
Not every shade in a tint range is designed to be used on its own. Copper Mahogany is one of the shades that helps refine a colour result. This mahogany tint contains a low-intensity red pigment. Added in small amounts, it warms up a shade, introduces a copper-red undertone or corrects a colour that doesn't quite match the client's hair. Used on its own, it creates a subtle mahogany colour with minimal skin staining.
Two main uses
- Adding a copper-red undertone: just a few per cent added to a blonde or brown tint is enough to warm it up. With Golden Blond, 10% Copper Mahogany creates a strawberry blonde shade.
- Correcting a colour: when a shade looks too cool or dull for the client, Copper Mahogany helps rebalance the mixture towards warmer tones.
Why a gel texture?
Accurate measuring is essential when blending shades. The gel texture is easy to dispense and measure, then mixes smoothly with other Noemi tints. It stays on the brush and doesn't drip during application.
Active ingredients
Like the other Noemi gel tints, Copper Mahogany contains niacinamide, hydrolysed corn, wheat and soy proteins, aloe vera and lemon essential oil. These ingredients help protect the hairs and soothe the skin during tinting.
Colour blends: the key ratios
| Desired result | Base shade | Copper Mahogany |
|---|---|---|
| Strawberry blonde | 90% Golden Blond | 10% |
| Copper-red undertone in another shade | Chosen shade | Small amount, adjusted as needed |
Prepare the shade blend first, then add an equal volume of developer. Increase the proportion of Copper Mahogany gradually. Its gentle pigmentation gives you plenty of flexibility to fine-tune the result.
Results and longevity
Used alone or blended with another shade, the colour lasts 5 to 6 weeks on the hairs. Skin staining remains subtle and fades within 7 to 10 days, depending on skin type and aftercare.
Which developer should you use?
| Use | Developer | Result |
|---|---|---|
| Subtle copper-red undertone, natural finish | Crème Solution 3% | Soft colour focused on the hairs |
| More noticeable skin stain | Gel Solution 3% | More visible skin staining |
| More intense copper undertone | Solution 6% | Richer copper shade |
For eyelashes
Used alone or blended with another shade, Copper Mahogany can also tint eyelashes, for example to complement light lashes and hair with copper-red undertones. Allow approximately 10 minutes of processing time, with the eyes closed and the eyelids and under-eye area properly protected.
Technical specifications
| Shade | Copper Mahogany, mahogany, low-intensity red pigment |
|---|---|
| Main use | Colour correction, adding copper-red undertones |
| Texture | Gel, non-drip formula |
| Size | 10 ml, approximately 40 applications |
| Mixing ratio | 1 part tint (or shade blend) to 1 part Noemi developer |
| Colour longevity | 5 to 6 weeks on the hairs; subtle skin staining for 7 to 10 days |
| Active ingredients | Niacinamide, hydrolysed corn, wheat and soy proteins, aloe vera, lemon essential oil |
| Application areas | Eyebrows, eyelashes |
Storage
Close the tube tightly after use.
- Shelf life before opening: see packaging
Instructions for Using Noemi Tints and Developers
This protocol applies to all Noemi tints (cream, gel and Lash Dye) and their developers. These products are intended for professional use only.
At a Glance
| Step | Eyebrows | Eyelashes |
|---|---|---|
| Tint / developer mixing ratio | 1:1 | 1:1 |
| Application time | 3 to 5 min | 3 to 5 min |
| Processing time | 10 to 15 min | Approx. 10 min (cream and gel tints); 10 to 15 min (Lash Dye) |
| Removal | Rinse with water | Rinse with water, keeping eyes closed |
| Colour longevity | 5 to 6 weeks on the hairs, 7 to 10 days on the skin | 5 to 6 weeks |
1. Before the Treatment
- Perform a sensitivity test before every tinting treatment.
- Choose the shade together with the client, taking into account their hair colour, undertones and desired result.
- Work on clean, dry hairs free from oily residue.
- For eyelashes: apply a protective cream to the eyelid skin, avoiding the lashes, then place a protective pad beneath the lower lashes.
2. Choosing the Developer
| Developer | Action | When to Use |
|---|---|---|
| Crème Solution 3% | Standard oxidation, even colour development and balanced skin staining | Standard eyebrow tinting, eyelash tinting, laminated brows and a natural finish |
| Gel Solution 3% | Controlled colour development and more defined skin staining | Medium-density or sparse eyebrows, graphic techniques, hair-stroke effects and tinting after a brow lift |
| Solution 6% | Intense oxidation and stronger colour development | Intense shades (red, copper, burgundy), deep black eyelashes and grey or resistant hairs |
- Solution 6% is not recommended for eyebrows when using universal or dark shades, or immediately after a brow lift. Wait until the hairs have stabilised again.
- You can mix Crème Solution 3% and Solution 6% in equal parts to obtain an intermediate strength of 4.5%.
3. Preparing the Mixture
- Place the tint in a mixing dish, then add an equal amount of developer (1:1 mixing ratio). Mix until smooth and homogeneous.
- When combining several shades, mix the tints together first, then add an equal amount of developer.
- The resulting texture depends on the combination selected:
| Combination | Texture | Result |
|---|---|---|
| Cream tint + Crème Solution 3% | Creamy | Soft and natural, focused on the hairs |
| Cream tint + Gel Solution 3% | Cream-gel | Defined, with enhanced skin staining |
| Gel tint + Crème Solution 3% | Gel-cream | Sharp and graphic |
| Gel tint + Gel Solution 3% | Gel | Intense, suitable for layered application |
4. Application
- Eyebrows: apply the mixture within 3 to 5 minutes in a thin, even layer. With a gel tint, outline the brows first and then fill them in, or work hair by hair. A second layer can intensify sparse areas.
- Eyelashes: the client must keep their eyes closed throughout the treatment. Distribute the tint evenly along the entire length of the lashes within 3 to 5 minutes, avoiding contact with the eyes.
5. Processing Time
- Eyebrows: 10 to 15 minutes.
- Eyelashes: approximately 10 minutes with cream and gel tints, and 10 to 15 minutes with Lash Dye.
- The exact processing time depends on the shade, hair thickness and skin type. Check the colour regularly and remove the tint as soon as the desired intensity is achieved.
6. Removal and Finishing
- Rinse the tint thoroughly with water. When rinsing the eyelashes, the client must keep their eyes closed.
- For eyebrows, carry out any shape correction after tinting, not before.
Precautions for Use
- These products are intended for professional use only.
- A sensitivity test is mandatory before every tinting treatment.
- When tinting eyelashes, always work with the client's eyes closed and protect the eyelids and the area beneath the eyes.
- If tint enters the eye, or if significant discomfort or a burning sensation occurs, immediately rinse the eyes with plenty of water.
- After a brow lift, the hairs are softer and more sensitive. Prefer Gel Solution 3% and avoid Solution 6%.
- Close tubes and bottles tightly after each use.
For professional use only. Avoid direct skin contact on the eye. Read directions for use carefully before application. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. May cause irritation to eyes and skin and can cause an allergic reaction.
Free shipping on orders over €170 (Excl. VAT).
| Zone | Delivery Method | Est. Time | Rate (Excl. VAT) | Details |
|---|---|---|---|---|
| Belgium | Bpost Home Delivery (Standard) | 48h | 6,0€ | Delivery to home or work. |
| Belgium | Bpost Home Delivery (Express) | 24h | 10,50€ | Fast delivery to home or work. |
| Belgium | Bpost Pick-up Point | - | 4,8€ | Pick up at post offices or partner locations. |
| Belgium | Mondial Relay Pick-up | - | 3,90€ | Pick up at shops or parcel lockers. |
| Belgium | Store Pickup (Click & Collect) | Upon email confirmation | Free | Pickup available at:
|
| France & Luxembourg | Home Delivery | 2 to 5 days | 7€ | Business days delivery (two attempts possible). |
| France & Luxembourg | Mondial Relay Pick-up | - | 3,90€ | Pick up at shops or parcel lockers. |
What is a mahogany eyebrow tint used for?
Primarily for adjusting a colour. Copper Mahogany adds a copper-red undertone to another shade or corrects a tint that is too cool. Used on its own, it creates a subtle mahogany colour.
How do you create a strawberry blonde shade?
Mix 90% Golden Blond with 10% Copper Mahogany, then add an equal amount of developer. The result is a blonde shade with copper-red undertones.
Is Copper Mahogany very red?
No, its red pigment is low in intensity. It leaves a subtle stain on the skin and gives you plenty of flexibility to control the strength of the copper-red undertone.
How long does the colour last?
The colour lasts 5 to 6 weeks on the hairs. Skin staining is light and fades within 7 to 10 days, depending on skin type and aftercare.
What is the processing time?
Allow 10 to 15 minutes for eyebrows and approximately 10 minutes for eyelashes. Check the colour during processing, particularly when blending different shades.
Is a patch test necessary?
Yes, before every tinting treatment. This product is intended for professional use only.
Aqua, Monoethanolamin, Isopropyl Alcohol, Propylene Glycol, Cellulose, 4-amino-2-hydroxytoluene, Resorcinol, Sodium Erythorbate, Citrus Lemon Peel Oil, Niacinamide, Hydrolysed Soy Protein, Hydrolysed Wheat Protein, Hydrolysed Corn Protein, P-phenylenediamine, 2-Phenoxyethanol, Ascorbic Acid, EDTA
