Hybrid Liquid Dye Set

Allergy Test

The formulation of our dyes contains no harmful substances for health; however, an allergy test must be performed at least 48 hours before the treatment.

Mix the liquid dye and the oxidant, and apply the mixture behind the ear or in the crease of the elbow. Wait 10 minutes before removing the product with a damp cotton pad. If no reaction occurs within 48 hours, you may proceed with applying the dye and oxidant to the eyebrows and lashes.

Warning

For professional use only.

Wear gloves.

Do not use if the eyes are irritated, infected, or showing signs of an allergic reaction.

Do not use during pregnancy or breastfeeding.

Discontinue use in case of irritation.

In case of direct contact with the eyes, nose, or mouth: rinse immediately and thoroughly with water and consult a doctor.

Stop using the product if red spots, swelling, irritation, or itching appear.

Keep out of reach of children.

Store in a dry place at or below room temperature.

1. Before tinting eyelashes and eyebrows.

• Shake the bottle of hybrid dye well before use.
• Remove all eye makeup before applying the tint to lashes and brows.
• For optimal results, brows must be dry and free of oil and sebum, as these can create a barrier that prevents the hybrid dye from adhering to the skin or hair.

2. Skin preparation.

For best results and longer-lasting skin stain, the eyebrow area should be cleaned and exfoliated (optional).

We recommend using our Lash Foam. Use a brush and make circular motions, then rinse with saline water. This step applies to both brows and lashes and ensures the removal of dead skin cells, sebum, and oil.

3. Dye preparation.

Mix the hybrid liquid dye and cream oxidant to create a creamy paste using a spatula or brush.

The mixing ratio is usually two drops of hybrid liquid dye to one drop of cream oxidant.

4. Tinting procedure.

Step 1

• When the client closes their eyes, apply your pre-mixed dye to the brows with care and precision.
• It is highly recommended to do brow mapping beforehand for a clean and precise result.

Step 2

• Ensure the hybrid dye is applied directly in the desired shape, as it starts working as soon as it touches the skin.

Step 3

• Application time ranges from 2 to 10 minutes depending on the desired intensity and results. We recommend a total time of 10 minutes; however, monitor the process to see how the tint develops on the skin and hair.

Step 4

• For best results, try removing the front part of the brow after a few minutes for an ombré effect.
• For a more ombré look: 6–10 minutes on the tail, 4–6 minutes on the middle, and 2–4 minutes on the head of the brow.

Lashes

• Application time for lashes is 5 minutes. Always use an eye protection pad. Lash tinting should never touch the skin.

5. Removing the dye.

Step 1

• Remove the excess hybrid dye using a cotton swab or pad, gently dabbing from the head to the tail of the brow, avoiding smudging outside the shape.
• Remove the remaining tint with a slightly damp cotton pad, wiping from front to top. Do not rub.
• As hybrid dye is highly pigmented, we recommend taking all necessary precautions to stay within the lines. If any product goes over, wipe immediately with a dry cotton pad.
• If a stain remains, don’t worry – you can use our Dye Remover.

6. Aftercare.

Important note: Hybrid dye may appear darker on the first day. This is a normal part of the process as the dye continues to oxidize on the skin before reaching its final tone.

The tint will gradually fade once the brows get wet.

• Avoid makeup and facial cleansers around the area during the first 24 hours.
• Avoid prolonged exposure to direct sunlight, as well as saunas, steam rooms, or swimming pools for 24 hours.
• Avoid exfoliating and using anti-aging products around the area at least two to three days before and after the treatment.
• Avoid using self-tanning products on the face for around two to three days.
• Try not to touch the brow area too much after the treatment, as fingers can transfer oils into the pores and clog them.